Annual Maintenance

  • Condenser Coil fins will be cleaned.
  • Evaporator Coil will be inspected.
  • Blower Wheels be inspected.
  • Air Filter will be replaced at customer's option.
  • Belts and Pulleys will be inspected and adjusted as required.
  • Lubrication of motors and bearing.
  • Thermostat will be checked and calibrated as required.
  • Controls & Safeties will be inspected and tested.
  • Motors will be cleaned and inspected.
  • Capacitors will be tested.
  • Condensate Drain will be checked to assure it is open.
  • Crankcase Heater will be operationally checked.
  • Relays and Contactors will be inspected
  • Unit Disconnect will be inspected.
  • Unit Wiring will be inspected.
  • Temperature or Pressures will be taken.
  • Heat Strips will be operationally checked.
  • Reversing Valve will be checked for systems with heat pumps.
  • Auxiliary Heat Strips will be checked for systems with heat pumps.